|
|
Integrated Vital Signs Monitoring
|
VitalScan incorporates Pulse-Oximetry, NIBP, Respiration, Temperature monitoring and end-tidal CO2 monitoring in a single package controlled from your PC or laptop. The dedicated Windows™ software gives instant visual feedback on all your monitoring options and there are alarms available for every system monitored. This gives you an at-a-glance appraisal of your patient and provides the very best possible care for anaesthetised animals.
|
Key Features of the BAS VitalScan
Veterinary designated Windows™ software supporting Pulse-Oximetry, Oscillometric Blood Pressure monitoring, Respiratory monitoring and Temperature monitoring.
Simple serial link to your PC/Laptop
All monitoring sensors are controlled by your PC giving you central control of all your monitors
Alarm options available for all sensors.
Full monitoring reports available for all sensors
Monitoring reports can be saved to file for later reference
Integrates with ECG3 for combined on-screen display
Automatic scheduling of Blood Pressure measurements
Centralisation of monitors simplifies set-up procedures during anaesthesia.
All the facilities you expect, combined into an integrated package to provide the ultimate in monitoring control
|
Technical Specifications
General
With recently added end-tidal Carbon dioxide monitoring the VitalScan offers integrated multi-parameter monitoring for todays modern veterinary operating theatres.
Mechanical
Dimensions: 28cm x 27cm x 10cm
Weight: 2.8kg
Construction: ABS plastic Grey with anti-slip feet
Electrical
Supply: 100 – 240v AC 50/60 Hz only
Power 60VA
Rear panel fuses 1A
Plug fuse 5A
Pulse-Oximeter
Method: Dual light beam, transmission or reflective assessment.
Heart rate range: 18 –450 bpm
Dynamic range: 0-100% (within specified accuracy from 70-100%)
Probe types: Transmission/clip type and reflective/flat type
Alarm settings: full range high and low options
Status indicator: green – good reliable signal
Yellow – signal of doubtful or poor quality
Red – no signal or unusable signal
Display values: Saturation percentage, heart rate, and signal quality
NIBP Monitor
Method: Oscillometric non invasive
Measurements: Systolic, Diastolic and Mean arterial pressure
Dynamic range: up to 245mmHg
Heart rate range: 20 –275 bpm
Maximum time for reading: 120 seconds
Automated repeat time: Minimum 3 minutes, maximum 99 minutes
Alarm settings: High and low for Systolic, Diastolic and MAP
Patient size: kittens to large dogs
Display values: Systolic, Diastolic, MAP, heart rate, time to next measurement, cuff pressure & deflate rate
Additional features: Learning ability, to reduce measurement time
Respiration Monitor
Method: In-line temperature sensor in 15mm T-connector
Range: 0-120 breaths per minute
Alarm settings: High and low breathing rates, Apnoea time (1-300 seconds)
Display values: Breaths per minute and time since last breath in seconds
Temperature Monitor
Method: fully encapsulated thermistor
Use: oral, rectal or cloacal. Cleanable.
Range: 85.1F to 110.4F
Alarm settings: full range, high and low alarms
Display values: temperature in Fahrenheit or Centigrade
|
|
|
|
 |
|
|
|
"...Designed
by
Vets
for Vets..."
|
| 
|
| Vetronic Services at Vets Now Emergency and Critical Care Congress |
... More |
| Vetronic Services at Autumn BVZS meeting |
... More |
|
|