ERM-8010

THE ERM-8010 is a very sensitive ECG monitor that typically detects and displays a Lead II ECG in real time. With easily configurable alarms the monitor can alert you to rising or falling heart rates and the display is easily readable for viewing gross ECG abnormalities such as atrial fibrillation or heart block. A common use is to monitor toxic patients for ventricular ectopics during a pyo or gastric torsion. The respiratory monitor uses an in-line sensor that fits into your ET tube and records the respiratory rate and can alert you to periods of apnoea in a range from 5 to 60 seconds. The ERM-8010 also has a trend feature that stores the heart and respiratory rate every 60 seconds. This is displayed on the screen so that at any time the trend for the last hour can be seen. The unit has an extensive battery life. One standard 9-volt battery will give a working life of 250 hours - equivalent to over 4 months of every day use.
 

Key Features of the ERM-8010 

  • Rapid, reliable patient monitoring 
  • Unobtrusive hand-held unit 
  • Suitable for all species 
  • Adaptor clips available for very small animals 
  • Indoor or outdoor use 
  • Freeze-screen facility for improved ECG viewing 
  • Variable sweep speed for fast or slow heart rates 
  • Easily settable alarms for heart rate and apnoea 
  • Optional beeps for QRS and breath detection 
  • View the last 60 minutes of heart & respiratory rate data 
  • Extensive battery life 

Technical Specifications

General

  • Screen size 58 x 18mm viewing area 
  • Screen Type: Reflective LCD 122 x 32 pixels 
  • ECG lead connection: 7-way screw-lock connector 
  • Respiratory connection: 7-way screw-lock connector 
  • Output: Optional analogue output to the Portable Vetronic Thermal Printer

Mechanical

  • Weight 475g 
  • Width 100mm 
  • Height 55mm 
  • Depth 190mm 
  • Construction ABS plastic (Grey) 
  • Display area 60.5 x 18.5 mm 

Electrical

  • Power Source 9 Volt PP3 Battery 
  • Power Consumption 25mW 
  • Current 2.5 mA 

Amplifiers 

  • Ecg 
  • Amplifier Sensitivity range 100uV to 5mV 
  • Heart Rates 10 to 800 
  • Sweep Speed 12.5, 25 & 50 mm/second 
  • Alarm Limits 10 to 600 bpm 
  • Heart Rate alarm increments 10 bpm 
  • Counting method Lead II R-wave detection 
  • Sensors Skin electrodes 
  • Input impedance 5M ohms 

Respiration 

  • Rates 1 to 150 breaths per minute 
  • Apnoea alarm limits 5 to 60 seconds 
  • Apnoea alarm increments 1 second 
  • Detection method Thermal 
  • Sensor NTC thermistor 
  • Placement In-line 
     

Vetronic Services Ltd 2014

Designed By: Insignia Creative, Website Design Devon